Houston AirHead - 8-11-2009 at 03:05 PM
OK im going to buy a 7m blaze II.
All i have to do is add another knot to the inside bridles?
(two front power lines).
?:puzzled:
DAKITEZ - 8-11-2009 at 03:43 PM
you need to undo the factory knot and make a new one. BUT ... Pansh is famous for making changes to their kites without any notification so its not as
easy as just moving a knot any more. You will have to play with the adjustments and work it out for your self. You will not have to worry about this
till you have whatever bar you decide to use somewhat tuned to the kite .... then make some adjustments to the bridles .... then tune the bar again
.... then make adjustments to the bridle again .... then tune the bar again ... then ... well you see where I'm going 
Just have lots of patience and I hope you have lots of windy days because you will spend many trying to tune in your kite. It is a decent kite once
you get it tuned in.
snobdr - 8-11-2009 at 03:56 PM
There should be no bar tuning other then making sure all lines are the same length. Trim all the way out and bar all the way in.
Houston AirHead - 8-11-2009 at 06:00 PM
OK thanks allot guys, really appreciate that input.
I have extra leader line so i could just add to the power lines as needed i suppose. Im going to fly it right out of the bag first though.