w8keluv - 8-12-2009 at 06:29 PM
here is a question for you kite rigging guru's out there....
i ahve a 2006 cabrinha switchblade 12m it came with a pulley system and im wondering if there is any way to fly a different bar on there and fly a 1:1
setup let me know what you guys think:wee::wee:
krumly - 8-12-2009 at 07:48 PM
I have an 06 SB12. Never flown it 1:1, and not sure the kite is designed for it. The '06 SB's have a quite lot of sweepback like Xbows, although
they are lower aspect and a tighter arch. Not to say you couldn't try it. Go to the Cab website and look for the manual on the 2N1 bar that came
with the 09 Convert:
http://pr.cabrinhakites.com/manuals/pdf/Powerdrive2N1_UM_Web...
That'll show you the basics on what you need to do to try it if you want to experiment.
krumly
w8keluv - 11-12-2009 at 08:58 AM
thanks man
Kamikuza - 11-12-2009 at 05:39 PM
I think I flew one them in a lesson ... the pulley was supposed to slow down the response but it was like driving a bus with no power-steering :eek:
good luck!