John Holgate - 23-1-2010 at 07:50 PM
A video of a bit of buggying and some scudding at 13th Beach on the south coast of Victoria. Started off with the 2m Beamer in 20knots but it just
wasn't quite enough so I pulled out the 3m Flow. Managed 51.6 kph and 53km of buggying in a couple of hours. There's nothing else I'd rather be
doing!
Too much fun on 13th Beach
tom kite - 23-1-2010 at 08:03 PM
sweet!!
rocfighter - 24-1-2010 at 05:45 AM
Looked like a fun filled day.
Kamikuza - 24-1-2010 at 06:42 AM
Nice 
Sweet beach - if that were here, there'd be cars parked all over it and driving up and down 
lynx69 - 24-1-2010 at 03:09 PM
Wicked fun stuff!!!
arkay - 24-1-2010 at 05:41 PM
Looks like a fun time!!
Your video is really stable. Is that the beach or your setup? Happen to have a pic ouf how you mount the camera?
bobalooie57 - 24-1-2010 at 06:48 PM
you get a quick shot of his cam. mount at :30 sec into vid#14 13th Beach Dec. 19th 2009. I think he modded it with a wooden extension, but I don't
remember which vid. I saw it in.
John Holgate - 24-1-2010 at 11:22 PM
This was my first effort at extending the camera from the back of the buggy - nearly worked! I put a thin strip of rubber (1.5mm) around the axle and
it completely stopped the slipping that occurred in this vid GoPro camera mount
It's a standard jockey wheel clamp, a floorboard, a two way tripod head, a bit of 6mm aluminum with a threaded 1/4 inch hole and the gopro flat
adhesive mount. It appears relatively stable mainly because the lens on the GoPro is so wide angle. The beach is pretty good too.
Thanks guys,
John