Since I finally had to fix the buggy seat. Wile it was off I fixed up the cart wheels and gave the buggy a couple coats of paint. I started with spray
on bedlinen for a base coat. I picked up the front wheel & tire today so as soon as WG finishes the front fork(Thanks Again) I'l be good to go
the old cart tires were so dry-rotted I thought they were going to explode when I put air in them so I got some new ones.
Almost can't call it a Rockville any more
New foot pegs with brackets for heel straps.awindofchange - 23-3-2010 at 04:23 PM
Looking good! I like the color!!!WELDNGOD - 23-3-2010 at 05:45 PM
nick . what size is your axle dia.?silvereaglekiter - 23-3-2010 at 05:48 PM
lets go with 5/8" inch for the axle tosilvereaglekiter - 23-3-2010 at 06:50 PM
WG how wide did u make the forks? I'm looking up the axle bolts nowWELDNGOD - 24-3-2010 at 06:19 AM
nine and three quarters of an inch. I am on the hunt for SS round stock nowrocfighter - 24-3-2010 at 11:44 AM
Hey Silver I like the idea of bed liner for an undercoat. We do the insides of our trucks and jeeps with it too. stands up to the mess we make and
washes off easy with a hose!!popeyethewelder - 25-3-2010 at 12:13 PM
That look sweet, love the colourWELDNGOD - 25-3-2010 at 01:50 PM
I take that back , it is 9 1/2 inchessilvereaglekiter - 25-3-2010 at 03:29 PM
WG I have access to 5/8 hot dip galvanized all thread.
I may be heading to grand view sat with the fam if you need any for the axlesilvereaglekiter - 26-3-2010 at 04:21 PM
Quote:
I may be heading to grand view sat with the fam
scratch that to cold for the kids so I'l get down their soonsilvereaglekiter - 27-3-2010 at 04:13 PM
Assembly Begins
Shiny nuts (lug nuts that is)
Seat got a coat of paint toWELDNGOD - 27-3-2010 at 05:20 PM
what is the dia. of your fork to downtube bolt?silvereaglekiter - 27-3-2010 at 05:32 PM
3/4 inchWELDNGOD - 1-4-2010 at 06:30 PM
Hey Nick, your forks are done. Sorry it took so long , but I had a TOP PRIORITY job that had to be done before I can take the time to piddle w/ the
buggy stuff . here is a pic .
I sprayed em w/ etching primer since you want to paint them. But they are 316 stainless steel, so they won't rust .
highazakite - 1-4-2010 at 06:50 PM
Nice design WG simple and strong / reinforced
(stored in memory bank for when i find a place any where near me in cali that's legal to run a buggy)silvereaglekiter - 1-4-2010 at 07:04 PM
thanks WG it looks great. will you be at the beach fri or sat ?silvereaglekiter - 3-4-2010 at 06:48 PM
Spent the day at home making some new side rail covers
with reflective striping for flaresilvereaglekiter - 6-4-2010 at 06:21 PM
gift from the (WELDN) gods All painted. Last pieces parts arriving tomorrow. Small snag with the side rail covers, I neglected to include the over lap
of the velcro but I have a fixsilvereaglekiter - 8-4-2010 at 04:23 PM
You called it WG the tire was a tight fit, I had to shorten the head of the bolt so it won't rub.
their are a few cosmetic things left but that's pretty much it.WELDNGOD - 8-4-2010 at 04:47 PM
looks nicecheezycheese - 8-4-2010 at 10:12 PM
Looks great...
Question- how do you like the finish of the bed-liner? is it smooth or textured..? (okay two ?'S) i was thinking of using it myself... silvereaglekiter - 9-4-2010 at 04:32 AM
The $10.00 can from northern had good texture. That covered the rails & 2 wheels The $7.00 can from Lowes was smother/less textured That went on 1
wheel, front forks & tough up. We'll see how well it holds up at WildWoodsilvereaglekiter - 10-4-2010 at 10:13 AM
all ready for WildWoodKamikuza - 10-4-2010 at 06:27 PM
Pimpin'! Needs some neon bling now too bobalooie57 - 10-4-2010 at 06:46 PM
Looks great! Can't wait to see ya tearin' up the beach at Wildwood!
