pusurask - 1-4-2010 at 10:38 AM
Anyone who knows what airpressure its suppose to be in the tyres!?
thanson2001ok - 1-4-2010 at 11:39 AM
I am just new to kite blading and recently bought a used pair of Coyotes. Someone on the forum suggested pumping them up with a hand pump as hard as
you can get them. I did just that. They feel very hard to the touch and worked fine.
The other recommendation is to remove the brakes. I haven't done that yet. I will try to adjust them as much as I can and if they just get in the way
when doing runs under power, out they will come.
Have fun.
Jaymz - 1-4-2010 at 08:06 PM
I think I read 90-100 psi.
A good bike tire pump will get them there.
I turn down my air compressor release valve to 90 psi and fill. My handheld guage is useless cause it lets half the air out before I can get it
seated.
And yea, nix the brake, less weight :wee:
Bladerunner - 4-4-2010 at 08:35 AM
They are rated for 80 PSI but I don't fill them that much. I use a small hand pump and get them hard but not rock hard.
More hard = easier to power slide. Less hard = better traction.