Dagon - 21-2-2006 at 08:50 PM
any ideas on what material I can use for brake bridal lines for a 9m bladeII:puzzled:
Scoopy - 22-2-2006 at 06:12 AM
http://www.kitebuilder.com/catalog/index.php/cPath/30_70?osC...
this is supposed to be good bridle line.
www.kitebuider.com call them up and ask for steve. He will be sure to point you in the right direction.
Scoop
Scoopy - 22-2-2006 at 06:25 AM
Check out my site, I just put up some bridling on Blades
Click my site in my signature, then click
"technical stuff" on the left side of the page
Im working on getting lengths for lines for the 9m. I have a friend that also needs some bridle lengths for a 3.3 blade 1.
Scoop
Dagon - 23-2-2006 at 10:07 PM
thanks scoop, I will be sure to check it out. btw, do you know how much difference I will see between a 3m blade and a 2 m samurai, I am looking for a
high wind kite and cant make a decission.
Scoopy - 24-2-2006 at 12:57 PM
Well, heres how it goes. The Samurai produces very little lift, and the blade loads. The Samurai is a wonderful easy going smooth kite, the Blade is
very aggressive and snatchy. The 2m Sami is not in the same power range with the 3m blade, try something more in the 3m range for comparison.
Although I have now flown one yet, talking to the guys that have, the new Rage from flexi is a wonderful kite if your not looking for lift. All said
though, the Sami is a very nice kite. It really depends on what you want. I would say the Sami would be a safer choice.
Scoop
Dagon - 2-3-2006 at 07:46 PM
Im going with the 2m samurai, Im gonna swap out my 4m samurai for a razor or blade.