hi there, been out today on my flysurfer and my depower line came undone! i cant work out what holds it in ? can anyone help? the pic is the de power
line and the trim. does it just tye on in a knot?erratic winds - 26-2-2013 at 02:35 PM
Quote:
Originally posted by shakenup
hi there, been out today on my flysurfer and my depower line came undone! i cant work out what holds it in ? can anyone help? the pic is the de power
line and the trim. does it just tye on in a knot?
A picture is worth several thousand words.....shakenup - 26-2-2013 at 02:36 PM
can you see the picture?carltb - 26-2-2013 at 04:53 PM
noerratic winds - 26-2-2013 at 05:38 PM
There is no picture at all, no link, nothing. When I quote your posts (a good way to see broken links and stuff), there is nothing there.tridude - 26-2-2013 at 06:15 PM
Yes to answer your question.....make sure your depow line is approx 15 inches from the bar resting on the chicken loop to the bottom of the
trimmer...........
1--you have a nylon loop in the bottom of your trimmer......thread your depow line thru the loop and tie a figure eight knot making sure you have 15
inches of line or throw in your depow line.....
2-- depow line length or throw.......make sure your bar is bottomed out on your chicken loop. Measure from the top side of your bar to the knot that
your tied at your trimmer loop......this measurement should be 45 cm or 15 inches.....this will give you your correct throw/ depower.........
Anymore questions pleas contact me via U2U.....hope this helpedtridude - 26-2-2013 at 06:51 PM
take a look at this link.......the last pic shows the bar resting against the chicken loop with the depow line running into to the bottom of the
trimmer............again the distance from the top of the bar to the bottom of the trimmer should be 15 inches......
