Dragonfly carbon products

HI guys, i am the boss of this

https://www.facebook.com/pages/Dragonfly-c...276843652333409 belly pan, guards and discs covers

If somes are interesting by belly pan, tell me more ! shipment is free, also price can be lower for more than 5 belly pan

shipment is free

soon available, protask guard, apexx guard and sysmic S1 guard.

like this one ?

Quote: Originally posted by dragonfly carbon products

like this one ?

that's not really a disc wheel by my definition.
it's just a regular wheel with the round piece of CF tie-wrapped to the spokes....opposite of weight savings...perhaps better aerodynamics(?).
a real disc wheel, by my definition, is a wheel with no spokes. the hub and rim is supported by the actual disc. I have some and they cost about $350 a piece if you can find them.
the disc is an integral part of the wheel and not just a piece stuck to the wheel.
Paul

I think that the cover is more for safety, as those 17 inch Sysmic wheels look like they could do some chopping if any part of your body happened to get close enough. :o so not so much carbon wheel as cool protective cover made of carbon and in the case of my S1 I'm
not looking to save any weight just piece of mind that I come back from the beach with all my fingers.
Ken

Quote: Originally posted by dirtslide

I think that the cover is more for safety, as those 17 inch Sysmic wheels look like they could do some chopping if any part of your body happened to get close enough. :o so not so much carbon wheel as cool protective cover made of carbon and in the case of my S1 I'm not looking to save any weight just piece of mind that I come back from the beach with all my fingers. Ken

sounds good to me. they look good too.

hi guys, don't forget to tell me how many plates you want, it could be cheaper to send one package than 5 if somes can delivery it to you ?


We make disc covers for the Sysmic wheels lenticular, we have to put it in europe on races, i am waiting for landsegler wheels to see if it is possible to make concave covers too; sysmic covers are plates !

For the fender, the GT race guard and protask guard are now available, also we expect to od the apexx guard asap too

Also Apexx ll soon have our protos of belly pan, specially shaped

Awesome, thanks guys!! Have been talking with dragonfly on FB about the fender, waiting for measurements now. Can't wait, this is gonna look awesome on the MG.

You are correct, CSAdeadon and I are in the same area...kinda. Close enough, anyway

Dragonfly....The measurement between my fork is 10.625 inches, or 26.9875 centimeters. I would like a price please. U2U sent. Thanks!!

It seems that it was decided that all US kiters are Chris and all Canadian kiters are Ken... Fueled by the talk at buggy camp!

Now you only have to remember Chris or Ken.

Yours will cost extra for the "Boobie". That is close to the basic price. I'm negotiating for a better price for the volume but he's dragging his feet in his response. All I got yesterday was an address confirmation question.

:o:evil:

:barf: waiting

Plates are in my saloon guys ! i just finish polish all yours are the last one, now have to wait fews weeks to make a new stock !

Quote: Originally posted by jooopy

:barf: waiting

yep, finger on the trigger here.

last piece in the puzzle for my Sysmic S1

Quote: Originally posted by dirtslide

last piece in the puzzle for my Sysmic S1

i dunno bot that cause i hear 8track players makin a big comeback. im thinkin go w the alternative energies thing like add a flexible solor panel attached to some strobes. this carbon fiber plate will definately protect my assets.

Quote: Originally posted by BeamerBob

Dragonfly will be shipping out on Friday. I'm not sure what this limitation was based on but he told me in his last email that he would be shipping Friday. I have money transferring to my paypal account but that should be finalized and money sent to Dragonfly today or tomorrow.

Thanks BeamerBob your work is well appreciated. Thanks to Dragonfly as well.

BTW did anyone order a fender directly?

Thanks for all the time spent on this project Bob. we all have to remember that good things come to those that wait

Cant wait to see the new design.

are we going to draw straws to see who gets the new designed pans

after all the time and effort that Bob has put in and because he will see them first he will definitely have dib's on one of the new designed pans if he wants.

hey guys !!!

sorry i haven't paid attention to this post much but.. for future corespondence, if he's french and you need something translated in either french to english or vise versa i would be more than happy to help you out..

if it can make things easier don't hesitate to let me know

cheers

Steff

HI guys, package on the way, delate cause the customers kept the package to getme somes extra taxes ahah , so hope you having the package monday !

The french tracking number doesn't work in usa, it ll be changed asap he arrives and then i ll be able to give you the new numbers !

yep that 's what he's saying.. i will send him a PM in french to get it confirmed.. and will report back

Steff

U2U sent

i asked him to confirm that he did send it a few weeks ago and that costoms held it in order to get more taxes from him..

also asked to get the french tracking # this way you can track it from their provider until it is switched over.. at least this way you will know when the package leaves the country of origin..
and asked how long did the service he used said they would take to ship an international package.. 4 to 6 days or 4 to 6 weeks ?!?!?!?!?!

i will translate and post his reply or i can copy past it in a U2U to Jooopy

Steff