IFlyKites - 3-9-2014 at 04:50 PM
Hello,
Just wondering if you guys think 65'/300# 65'/150# quad lines will work with a PL Reactor II 3.5m?
Cheers, Ari
ssayre - 3-9-2014 at 06:07 PM
Hmm, wish I could help but I'm not sure. I think it would under most conditions. They might break if flying well powered. I don't see the harm in
trying as long as your not jumping.
awindofchange - 3-9-2014 at 06:19 PM
It will work in lighter winds, but if you plan to get fully powerd up you will probably want to go a little stronger.
hassan123 - 20-10-2014 at 04:42 AM
Yeah, brake line "slackness" is something you will have to tweak to your personal preference, by adjusting the distance of the brake leader knot from
the handle. Too much slack in the brake lines and you wont be able to deploy the brakes at all. Not enough slack in the brake lines will make it
difficult to get the kite to the edge of the wind window. Take some time on a day when you have some smooth wind, around 8 to 12 mph and spend some
time launching the kite, trying the brakes, landing and adjusting the brake leader knots. The brake lines are at a good adjustment when you can fly
the kite without any influence from the brakes, but can use the brakes to back the kite down to the ground. They are in good adjustment when you can
reverse-launch the kite.
____________________
Are you worried about 350-060 practice dump - pass4sure marks in IBM latest resource Alabama Agricultural and Mechanical University