Can someone tell me the default 5th line length (FDS) for a Flysurfer Pulse 2 14m?
Thanks. PHREERIDER - 20-12-2015 at 05:14 PM
good question, don't really know. i would guess around 23m maybe 22.5
its line length + bridle(if attachment is at least as long as mixer) + depower line + .5m or so
best i can do off the cuff, trimmed out with bar all the way in, it needs just a little sag. NO knots in the lower part for pass thru. indigo_wolf - 21-12-2015 at 12:28 PM
You might find the 11th post (by Armin) in this thread of interest....
so 26.817m, that puts considerable amount of slack drag in it, but always adjustable how you like it. i assume you have the the bridle elements. lunchbox - 21-12-2015 at 09:26 PM
Aw....great find Sam...Thanks!
Yeah, about 88ft...that seems a little long but at least now I have a great starting point. And yes, I have the bridle elements.
Quote:
so 26.817m, that puts considerable amount of slack drag in it, but always adjustable how you like it. i assume you have the the bridle elements.
Flyfish - 22-12-2015 at 07:02 AM
Yeah, about 88ft...that seems a little long but at least now I have a great starting point.
I remember I wore out a 5 th line on a pulse a while back. Down where it passes through the bar. I made a new section, but I made it a touch short. I
didn't know the measurement, so I winged it. Set it up, and it stalled like crazy. It was too short.
Point is, if it's even a touch too short, it'll stall on you.
Good luck.
PHREERIDER - 22-12-2015 at 09:53 AM
i made a series of add on ends for mine at first as well...then just dropped it and flew better ! but you need to be comfortable going without.
