Power Kite Forum

diameter of peter lynn spar

lp000028 - 17-2-2017 at 03:00 PM

markite - 17-2-2017 at 04:20 PM

length of Peter Lynn spar

awindofchange - 17-2-2017 at 05:47 PM

For what kite? PL has made plenty of spars over the 25+ years of kite making.

Ed Cline - 17-2-2017 at 07:10 PM

http://www.peterlynn.com/compact-stick-sizes/

OffAxis - 17-2-2017 at 07:18 PM

Girth of Peter lynn's spar

jeepersjoey - 17-2-2017 at 07:26 PM

I.D. and O.D. Of them all...I think that is what he wants.

Or perhaps the circumference?

Dunno. Either way...there is no answer.

OffAxis - 17-2-2017 at 07:30 PM

I believe this is the same guy that tried to by the Bohemith of an ARC from a very special member.

Ed Cline - 17-2-2017 at 07:45 PM

You can't make a dog hunt by whipping it.
Did the link help?

Bladerunner - 18-2-2017 at 02:01 PM

I'll bite.

I am assuming you are looking for spars for a Monster arc. If so, good for you not giving up on us for information. What kite are we talking about?

Collapsible spars are simply tent poles. At our mountain equipment stores you can buy replacements. At our MEC they will even cut them to length. In our shop the diameter of the blue rods are identical to newer arcs. It's not rocket science. If the spar fits the pocket and is stiff, job done! I chose slightly smaller ( gold coloured ) diameter ones for my 18m's tight pockets and they are plenty stiff enough.

Vince H. - 18-2-2017 at 03:35 PM

Micrometer measurement is 0.490 inches OD if that is what you need.

indigo_wolf - 19-2-2017 at 03:22 AM

Quote: Originally posted by Vince H.  
Micrometer measurement is 0.490 inches OD if that is what you need.


Was waiting to see who would be the first to reach for their pocket protector. :lol: ;)

ATB,
Sam

Ed Cline - 19-2-2017 at 06:05 AM

Ed Cline - 19-2-2017 at 06:12 AM

Are they all 1/2"?