flyguy0101 - 25-5-2017 at 07:22 PM
Okay- rust on the bearings one and to protect the hub and fork from damage I had to cut the bolt and side spacers - so in search of the 12mm
flexifoil front axle assembly if anybody has one they want to part with- let me know- fortunately since I had sold this buggy- I was able to send
the buyer the one from my other buggy but that leaves me without- please help
Thanks
Scott
bigkid - 25-5-2017 at 09:49 PM
1/2 inch is a hair over 12mm by only .028. I have used a piece of all thread from Home Depot. The one by my house sells metric all thread, and nuts.
Or you could try lowes also.
bigkid - 25-5-2017 at 09:52 PM
As for the side spacers, electrical conduit works too. Of course you'll end up with a bit of extra for the next time the rust comes to cause havoc.
TEDWESLEY - 26-5-2017 at 11:48 AM
Try boltdepot for the axle bolt. I used a bicycle handle bar for spacer stock. Check that it rests against the inner
race of the bearing and not the shield.