flexiforearms - 8-4-2007 at 01:34 AM
hello,
does anyone know where i can get the spacers
that go between skate tracks ive tried
loads of places with no luck thanks kev
happy kitin
flyhigh142 - 8-4-2007 at 01:52 PM
I used aluminum tubing I cut to length with a tubing cutter. Darn near any hardware store will have both. Tubing cutters do a slick job, always
perfectly straight, and pretty cheap too. You can always borrow one from a neighbor. You could use metal pipe with a quarter inch (5mm) inside
diameter too. Adds a bit to the weight of things that are already fairly heavy strapped to your feet. I built a really nice pair but haven't had the
right conditions/balls to try them!
Good Luck.
doomwheels - 9-4-2007 at 11:44 PM
Even pvc tube will work.
flexiforearms - 11-4-2007 at 08:08 AM
thanks for your help
SecondWind - 11-4-2007 at 08:09 PM
Can we see some pictures of your skates Flyhigh?
Cornel - 21-5-2007 at 03:43 PM
I'm new to kiting and skating-blading and I just finished my offroad skates. I made the spacers out of aluminum.
I was curious to see if you made yours and how it turn out.
See the posting "New Skates" for a picture.