eric67m - 15-1-2019 at 07:42 AM
It's free if you want it and have a newer Flexifoil Navarro buggy to mount it to.
At one point I made an attachment and seat for the back of my newer Flexifoil Navarro body to allow a second rider behind me. Ther person sits back
past the rear axle. It has an adaptor thay mounts to the buggy then a separate back supported low chair bolts to it with only two bolts. Both my
daughter and my mother have used it. I now have other ways to take them for rides. The only downfall to the design is that the buggy driver must be
sitting down before and after the rider gets in or the buggy will tip up on end. Made from both steel and stainless (rusting some). The seat bottom
is taped up from when it ripped before.
I will have to check the bolts in my buggy, they were possibly changed to longer ones to bolt this on.
Let me know if you want pictures.
jjesseday - 16-1-2019 at 07:41 AM
I got a Flexifoil buggy from Rick. But I dont thinks it's a navarro. I wonder if this would work?
eric67m - 16-1-2019 at 11:56 AM
I don't believe so. I think my siderails angle down to the axle and that buggy comes straight back. The seat would sit at a weird angle. The side
rails are probably spaced different.
jjesseday - 16-1-2019 at 05:45 PM
Ok cool, thanks!