solid bar to walk buggy to beach

Quote: Originally posted by BeamerBob

Xxtreme made one. I have one but I bet there is a picture of it online.

Thanks beamer Bob. I'll try and find it on the forum.
Cheers Alasdair

I made one using 1-inch PVC. Glued it all together, then drilled and used screws to reinforce the joints. Used strips of velcro to attach to the foot pegs, and an old wrist strap to pull with.
Unfortunately, I left it on a beach and haven't bothered to make another. If you try it, make one for me too
If I get another put together for WBB, I'll post pictures.

Quote: Originally posted by hiaguy

I made one using 1-inch PVC. Glued it all together, then drilled and used screws to reinforce the joints. Used strips of velcro to attach to the foot pegs, and an old wrist strap to pull with. Unfortunately, I left it on a beach and haven't bothered to make another. If you try it, make one for me too If I get another put together for WBB, I'll post pictures.

Thanks Higuy I was thinking of making it in aluminum pipe but Pvc pipe will work to. Cheers Ali

Quote: Originally posted by Demoknight

Martin makes them for his GT-Race buggies. It's pretty simple. It's basically just a big tuning fork with some little pegs facing in on the tips that go into some 10mm holes in the plates of the forks above the front wheel. It's here called the Towbar: http://www.gt-race.nl/products

Thanks Demoknight look good. But won't work for me as my buggy is a Peter lynn Xr Buggy.

That it all made up now.
Have put Handlebar Tape Non-Slip Shock-Absorbent on the handle part here's a couple more pictures of it together and broken down.

Close up

Broken down

That has to be one of the nicest walking sticks I've seen.

Quote: Originally posted by kteguru

That has to be one of the nicest walking sticks I've seen.

Thanks kteguru. It'll do for me.