cosmicwind - 30-7-2007 at 10:32 PM
It has been over 2 weeks now since i started using the Ozone Haka on its standard Ozone handles and really loved it but I'm also very interested to
see how it'll fly on a bar. I do know that Ozone also set up the Haka to be rig on its own control bar that can be purchase at an extra cost. I have a
Naish control bar an X3, i believed, that has been
sitting in my closet unused and was just wondering if i can
use it for this particular purpose considering i never have seen an Ozone bar upclose. Here is the picture of the bar:
http://www.flickr.com/photos/10733490@N05/?saved=1
What will i do or change to make this bar useable? Thanks.
Peace,
Lyd
flyhigh142 - 31-7-2007 at 05:37 AM
I have a 5 meter Haka and just had to remove that short strop because it severely limited control. I love flying it now. Don't have a clue about
converting to a bar, though.
powerzone - 31-7-2007 at 09:41 AM
Those Naish X3 bars are my favorite bar to mod kites with...
if you want to use the sheeting and depower of the bar, you'll have to mod your kite to accept it. highly reccommended as it adds a whole new
dimension to kites.
if no depower, then do the crossover rigging as posted in this forum.
cosmicwind - 31-7-2007 at 05:24 PM
Sorry for the bad link, here's the picture of the bar, i think i got the link to work this time:
http://www.flickr.com/photos/cosmic_wind/
Powerzone: the Haka has a fixed bridle configuration so sheeting/depowering is not my intention i just simply want to fly it on a bar.