OK...
What a difference this makes... its kinda fun...
Let me state that I am a lil OCD (or a lot) when it comes to my hobbies... so I like to research and fidget with my stuff.
This mod kinda needs that attention, I had to adjust the breaks a lil after the mod change.
With it in low AoA mode, I flew the 3.5m in winds I probably wouldn't fly in... not that it was too high but too gusty.
The window grew to past the point of over my head, at first when it hit the above my head point it would collapse into itself. Then the adjustment to
the breaks (shorter) it helped dramatically. problem was the break turning was much more responsive to any pilot input, over break would collapse the
inflation and takes a second to regain power.
Once I got it down I could fly it flawlessly and it was a blast in the gusty winds, seemed more stable and could handle the changes in wind speeds
easier.
I have not tried the High AoA mode yet. But be sure I post as soon as I do.
Expect pics of the mods later tonight.
ScrewyDAKITEZ - 13-4-2008 at 09:26 PM
Get ready tommorow is the day. I want to see this in action.NPWfever - 13-4-2008 at 09:35 PM
Ok I looked into doing this for my 8m Ace to expands its windrange. I cut the line and everything but I had this thought....what if the line cuts my
bridles. What did you use? All I have is dacron line.SCREWYFITS - 13-4-2008 at 09:52 PM
Well my dumb a$$ left the CEPAT mod at home so I'll have to post it later.
The full detailed mods can be found in this forum and others forums if you need more explanations.
I would like to share the Mini AoA I built for my Ace 5m, it is going to be more convenient to adjust high to OEM to low AoA. I'll be installing this
week and hopefully I'll give a review...
The colors are diff for left and right sides of the kite.
ScrewySCREWYFITS - 13-4-2008 at 09:59 PM
Quote:
Originally posted by NPWfever
Ok I looked into doing this for my 8m Ace to expands its windrange. I cut the line and everything but I had this thought....what if the line cuts my
bridles. What did you use? All I have is dacron line.
Well the CPEAT is attached into the bridal system just like your fly lines.
The Mini AoA I used the small key rings for the B bridal to slide through so hope fully no wear...
and the mod slides not the bridal so if it wrecks it ill make a new one...
ScrewySCREWYFITS - 13-4-2008 at 10:00 PM
Quote:
Originally posted by dlish89
Get ready tommorow is the day. I want to see this in action.
Dlish...
I got my fingers crossed the gods will be on our side tomorrow.
ScrewySCREWYFITS - 14-4-2008 at 01:08 AM
OK...
I figured out the picture thing, I used Photobucket instead of Myspace...
ScrewyNPWfever - 14-4-2008 at 07:15 PM
WowowowowowowO! Wait a second....! I went to measure out to try my cepat and the thing is like 4 feet long! That can't be right?! Its for my 8m but
the 5+6m ones call for a 72cm initial distance, then like 6 gaps at 12cm each. This is crazy?! When I went to do the epat a while back they were like
3cm long. Did I mess up or what?!NPWfever - 14-4-2008 at 07:17 PM
My bad! It's in MM! hhaahhhahaha *kicks self in head* (multiple times)SCREWYFITS - 14-4-2008 at 09:18 PM
Yeah... I shortened the whole thing up 15mm. I didn't want all that extra line... plus mine is going on a 5m... I woulda flew it today but the wind
was violent and the Blaze 3m was lifting me a foot or so... :o I did my first pendulum jumps, only a foot or two off the ground but traveled 6-8 feet.
great feeling... I can see how the larger kites would be nicer...NPWfever - 15-4-2008 at 06:04 AM
Got mine done on my 8m. I have an 8cm gap where it says "75mm" and then 2cm gaps from there. It's just set in the neutral position now, but not gonna
get it up.....40mph predicted. WELDNGOD - 16-4-2008 at 06:24 AM
What are you guys using for line and where did you get it?SCREWYFITS - 16-4-2008 at 12:15 PM
I get the line at a place called Doms here in town and they supply all kinds of outdoor stuff, and its only $.19 a foot. I believe its in the climbing
rope family.NPWfever - 16-4-2008 at 03:25 PM
I used some dacron line I had leftover from bridling my NPW.SCREWYFITS - 16-4-2008 at 09:40 PM
NPW whee did you get the Dacron to build your npw?WELDNGOD - 17-4-2008 at 03:42 PM
more specific please . what lb test line is it? 250? 500?SCREWYFITS - 18-4-2008 at 01:16 AM
I am unsure of the test line Weldngod, the gentleman at Dom's is going to try and get that info for me, I just picked up more line today and had asked
that very question... I'll give up any info I get...
My guess would be apx. 200lbs maybe less...
ScrewyWELDNGOD - 18-4-2008 at 07:18 PM
thanx screwy, Im gonna order some dacronSCREWYFITS - 18-4-2008 at 08:32 PM
Yeah... being that it's in the bridal it doesn't have to take any where close the load as the main lines...
Good luck, and let me know your end results...
Screwy
by the way I got the folding PL buggy and already had to modify it. I SUPER BEEFIED the seat check out the pics... all the 2" strap on the seat, I
added...
Thanx to bugymangp, he sold me this cherry Bug...
ScrewyWELDNGOD - 19-4-2008 at 06:07 AM
That should do fine until you build your custom bug
great feeling... I can see how the larger kites would be nicer...
