art_lessing - 29-8-2008 at 01:27 PM
hey does any body know where to find a cascade bridal template for a NPW9 3.4?.....my 3.4 recently got stuck in a power line/pole :o...luckily the
wind miraculously untangled the kite after I disconnected from it and soiled my self...and it eventually came down..it didn't look good for a bit
there...but anyway the bridal got all discombobulated..and there is a small 1.5 inch rip...coulda been so much worse.... but I figure a cascade is in
order since I need to replace it any way.....
DQ
NPWfever - 29-8-2008 at 01:59 PM
http://members.shaw.ca/kiteman/Downloads.htm
Download his calculator for the 9b (vulture) and put in 3.4m
kitemaker4 - 29-8-2008 at 02:10 PM
The site Nick posted works great.
Just take your time and do not rush and before you know it you will have a new bridle.
Susan (npw goddess)
NPWfever - 29-8-2008 at 09:54 PM
The reccomended line for that kite would be spectra, probably 50#, but I used dacron on my 5.5m and over such a short distance it really isnt even a
factor, I just wouldn't use dacron flying lines. And over the distance that a 3.4 would have, I wouldn't worry about it at all. And should only cost
you about $20, good luck, talk to either me or susan if you get stuck.
kitemaker4 - 30-8-2008 at 01:45 AM
If you do run into trouble I will try and help out in any way. So far I have made between 15 to 20 nasa wings and have figured out a lot.
I might be out of touch for a while depending on where Gustav hits. Right now they are predicting it will come in not to far from me and I will be
evacuated and not able to post unless I can use someone elses computer.
Susan (npw goddess)
art_lessing - 3-9-2008 at 10:12 AM
well I have started redoing the bridal and have come across some problems with the program vs my kite....I have noticed that the stock bridal
positions for my 3.4 do not match the ones on the calculations. So I have compromised by using the 3.2 size bridal...I hope that works...plus I
noticed that my stock kite does not come with c1 Is that normal?
DQ
NPWfever - 3-9-2008 at 01:56 PM
It's possible you have and NPW5 then.....
art_lessing - 3-9-2008 at 06:07 PM
well the kite has the npw9 logo screened right on but it is the one from 2001 so I wonder if thats the difference..thanks for the help by the way
cheers
dq
NPWfever - 3-9-2008 at 08:15 PM
It's also possible that you have the NPW9 and the bridals are for the NPW9b, I believe there is actually a difference, he may also have that
calculator, see if that matches, also check the NPW5, I also don't believe any kite companies ever made the 9b......
If not shoot him an email, hes like the NPW god!!!
Peace,
NPW
i
c
k
andya - 4-9-2008 at 03:21 AM
Yep the HQ NPW9 and the online calculators for the NMW 9b are slightly different.
I've got most sizes of HQ NPW here. If you need a bridle leg measured then just shout!
Cheers, A
art_lessing - 4-9-2008 at 11:43 AM
well I guess I need all of the legs for a cascaded npw9 3.4?
dq