BigMikesKites
Senior Member
Posts: 960
Registered: 24-12-2008
Location: Dallas (Area), TX
Member Is Offline
Mood: Go away RAIN
|
|
Reactor II 5.5m
Peter Lynn Reactor II 5.5m Review
Since the new Peter Lynn Reactor II came out a couple weeks ago, I've been wanting to try it out. Of course as things always go when you get a new
kite, it rained for the past two weeks here in Dallas. So I didn't get to put it through the paces like I wanted to.
Finally, today I got with my buddy Eric and we went out to fly this kite.
Bag: The bag is excellently made. It is definitely a step up from the 'Access Line' of kite bags. But this is a Pro line kite and I would expect
nothing less from Peter Lynn. The mouth is a bit small I thought, but it keeps the kite secure and well protected. With this kite comes a snap
strap to keep it taught when in storage.
Line: Typical Peter Lynn Power Kite lines. Nothing special here. The standard true and true quality materials that we have come to expect from
Peter Lynn.
Handles: Standard Handles
Stake: Standard Peter Lynn stake. Mine was absent a sheath as I have had from my other Peter Lynn kites. I'm not sure if that is standard, or if I
just got unlucky.
Kite Killers: None supplied
Flight: I mentioned all the rain we have had lately. Well, the wind was so non existent today that the flags couldn't get off the pole. At the
time of flight the wind speed was 1.3 mph with a max of 3.1 mph as noted with my windmeter.
Yet, the force was driving us to get this kite off the ground somehow. It took a little coaxing due to the lack of wind, but once we got it
airborne, she flew beautifully. I was completely amazed at the Power behind this kite at such small wind speeds.
It is quick in the air too. Turning is crisp, responsive and accurate. We even put it at the edge of the window (wherever that was today) and it
had no tendencies to do anything but slow down and wait for your command. With no wind and brakes, this thing whipped around like a dog when someone
pulls its tail. Unbelievable!
Looking closely at the kite you will notice the lack of bridle lines on this kite. Not only are there alot fewer than most kites, but they are alot
thinner lines. Almost the thickness of brake lines on most Power Kites. They are definitely of a different material than what I have become
accustomed to.
Speaking of material, when Eric first unfolded the kite...get this, I'm undoing lines and he hurries to unfurl my kite for the first time. Nice.
LOL. He couldn't wait to see it.
Back to the story...when he unfurls it and picks it up, his first comment was how heavy this kite is. 'Feels like Denim' he says. I don't know
about denim, but it is definitely heavier than other kites of a similar size. But this in no way affects performance.
Synopsis: Wow. Amazing kite. I will have more to report when I get some wind. I can't wait to get it on the buggy and try it out. The kite is a
bit on the pricey side, but it is worth it in every respect.
To be continued:::
UPDATED: Flight 2
3 mph winds. BAH. What do I have to do to get some wind around here. Wait, pack up the kite to leave....then the wind picks up.
Still alot of fun. Waiting for closer to 10 and break out the buggy.
Mike
Owner Big Mike's Kites
http://www.BigMikesKites.com
Kites: Most of them
Buggy: VTT BLACK WIDOW...The best
Peter Lynn XR+ w VTT Rail Kit
Landboard: Not a chance
Water: still trying
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
Quote: | Originally posted by Akulakat
Peter Lynn Reactor II 5.5m Review
Back to the story...when he unfurls it and picks it up, his first comment was how heavy this kite is. 'Feels like Denim' he says. I don't know
about denim, but it is definitely heavier than other kites of a similar size. But this in no way affects performance.
|
The RII is actually a teeny bit lighter than the original. But you've beaten me to the air with it and I can't wait to fly mine too. thanks for the
review and heads up.
|
|
lunchbox
Posting Freak
Posts: 1248
Registered: 13-3-2007
Location: Agoura Hills, CA.
Member Is Offline
Mood: Feeling Lucky...
|
|
Quote: |
Back to the story...when he unfurls it and picks it up, his first comment was how heavy this kite is. 'Feels like Denim' he says. I don't know about
denim, but it is definitely heavier than other kites of a similar size. But this in no way affects performance. |
Now this concerns me because I was really hoping that the new RII's fabric would be something similar to that of the ripstop they use on the
YaS-P-A-M-L-I-N-K-s. Light but strong.
I was happy to see Angus's reply because I don't find my RI that heavy at least compared to my old school beamer II's.
Anyone know why they don't use a lighter fabric like the yaS-P-A-M-L-I-N-K-s? Is it durability, stability or what...or am I just crazy and there is no
difference???
Flexifoil Blurr 2.5, Ozone Cult 3.5, Nasa Star 3 4.0 Ozone Yakuza 4.0, PL Reactor 4.9, JoJo RM+ 5.0, Ozone Method 5.0, Ozone Yakuza 6.0, Flexifoil
Blade IV 6.5, Nasa Star 3 7.0, PL Vapor 7.8, JoJo RX 8.0 (in route), Flexifoil Blade VIP 8.5, PL Vapor 9.4, Ozone Yakuza 10.0, PL Reactor II 10.8, PL
Vapor 16.1, PL Venom II 13, PL Charger 15, 19, Flysurfer Unity 12, Flysurfer Pulse 2 14, Flysurfer Speed 2 SA 19, Flysurfer Speed 3 21, MBS Comp 95
landboard, PL Folding buggy, PL XR+ buggy, Slingshot LFT, Lots of surfboards
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
They use at least 3 different types of fabric throughout the kite according to the application.
Actually, considering that I compared weights of the 4.9m R I to the 5.5 R II and they added two more cells to the 5.5, the fact that is is lighter at
all is impressive. (I allowed for the difference in size by calculating lbs/ sq. m)
|
|
BigMikesKites
Senior Member
Posts: 960
Registered: 24-12-2008
Location: Dallas (Area), TX
Member Is Offline
Mood: Go away RAIN
|
|
i think eric was used to his other kites. Mostly Flexifoil. It doesn't fly like it is heavy. To me, it is just 'different'. I guess I could weigh
it compared to a twister or something.
But weight isn't something on my list of concerns when it is a dream to fly.
Mike
Owner Big Mike's Kites
http://www.BigMikesKites.com
Kites: Most of them
Buggy: VTT BLACK WIDOW...The best
Peter Lynn XR+ w VTT Rail Kit
Landboard: Not a chance
Water: still trying
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
It's all good; I was not trying to contradict you but your post simply made me curious and led me look at it more since I had not flown mine yet.
Nothing tells you more about the kite 'till you put it in the sky. tomorrow...
|
|
ripsessionkites
Posting Freak
Posts: 4043
Registered: 17-10-2006
Location: California, Las Vegas
Member Is Offline
Mood: retired until racing starts
|
|
true the RII is lighter than the RI ... just in material alone.
talking with Michel D. they went with Mirai material since its a little more forgiving. With the reduced bridles "3 cells apart" they need something
that gives more. If you look at other kites say the Nitro Evo that using Porcher or Skytiger that using Icarex that doesnt give as much they can have
to put bridles per cell or only 2 cells apart.
|
|
lunchbox
Posting Freak
Posts: 1248
Registered: 13-3-2007
Location: Agoura Hills, CA.
Member Is Offline
Mood: Feeling Lucky...
|
|
Quote: |
But weight isn't something on my list of concerns when it is a dream to fly. |
Very true...can't wait to fly one...saving as we speak!
Thanks for the information Angus and Rip!
Flexifoil Blurr 2.5, Ozone Cult 3.5, Nasa Star 3 4.0 Ozone Yakuza 4.0, PL Reactor 4.9, JoJo RM+ 5.0, Ozone Method 5.0, Ozone Yakuza 6.0, Flexifoil
Blade IV 6.5, Nasa Star 3 7.0, PL Vapor 7.8, JoJo RX 8.0 (in route), Flexifoil Blade VIP 8.5, PL Vapor 9.4, Ozone Yakuza 10.0, PL Reactor II 10.8, PL
Vapor 16.1, PL Venom II 13, PL Charger 15, 19, Flysurfer Unity 12, Flysurfer Pulse 2 14, Flysurfer Speed 2 SA 19, Flysurfer Speed 3 21, MBS Comp 95
landboard, PL Folding buggy, PL XR+ buggy, Slingshot LFT, Lots of surfboards
|
|
RonH
Member
Posts: 477
Registered: 26-1-2008
Member Is Offline
Mood: Missing Sunset Beach
|
|
I have had about 4 hours on mine. :wee:
All I can add here is it flys even better in 15mph! I would not hesitate to ride with the 5.5 in winds up 20 if I had the space. the low lift really
helps.
Ron
PL reactor 2013 2.8
PL XR+
Home-brew buggy
|
|
-mj-
Member
Posts: 198
Registered: 28-5-2009
Location: Holland
Member Is Offline
Mood: kite + longboard = awesomeness
|
|
Quote: |
Now this concerns me because I was really hoping that the new RII's fabric would be something similar to that of the ripstop they use on the
YaS-P-A-M-L-I-N-K-s. Light but strong.
Anyone know why they don't use a lighter fabric like the yaS-P-A-M-L-I-N-K-s? Is it durability, stability or what...or am I just crazy and there is no
difference??? |
Actually the fabric used in the Yakuza GT is the same as PL uses for the access range, and not much different then what has been used for the R II
(except the porcher reinforcements in the R II), (Porcher is the fabric Ozone used in the past for the Yak, and what made them good)
No brand bashing intended but these things are important to know IMO, (you should know what you pay for)
Marijn Tijhof,
Peter Lynn Kitesports
|
|
furbowski
Posting Freak
Posts: 1470
Registered: 1-5-2008
Location: hong kong
Member Is Offline
Mood: stuck on a small island with big trees and tiny beaches...
|
|
thanks for the review...
bet you wish you'd kept that twister!
keep it coming, I love the way you're getting right into this sport!
fixed bridles, flying static, been two years now... ??? folks must be wondering....
sting 1.7, dp power 2.5, crossfire 3.2, ace 5, blade iv 6.5, ace 8, ace 12...
also a couple of arcs, 12 syn and 12 phanny, but i\'m not yet up to speed on them.
(13.11.09)
|
|
lunchbox
Posting Freak
Posts: 1248
Registered: 13-3-2007
Location: Agoura Hills, CA.
Member Is Offline
Mood: Feeling Lucky...
|
|
Quote: |
Actually the fabric used in the Yakuza GT is the same as PL uses for the access range, and not much different then what has been used for the R II
(except the porcher reinforcements in the R II), (Porcher is the fabric Ozone used in the past for the Yak, and what made them good) No brand bashing
intended but these things are important to know IMO, (you should know what you pay for) |
Thanks for the information MJ!
Flexifoil Blurr 2.5, Ozone Cult 3.5, Nasa Star 3 4.0 Ozone Yakuza 4.0, PL Reactor 4.9, JoJo RM+ 5.0, Ozone Method 5.0, Ozone Yakuza 6.0, Flexifoil
Blade IV 6.5, Nasa Star 3 7.0, PL Vapor 7.8, JoJo RX 8.0 (in route), Flexifoil Blade VIP 8.5, PL Vapor 9.4, Ozone Yakuza 10.0, PL Reactor II 10.8, PL
Vapor 16.1, PL Venom II 13, PL Charger 15, 19, Flysurfer Unity 12, Flysurfer Pulse 2 14, Flysurfer Speed 2 SA 19, Flysurfer Speed 3 21, MBS Comp 95
landboard, PL Folding buggy, PL XR+ buggy, Slingshot LFT, Lots of surfboards
|
|
|