TomTeaBags
Junior Member
Posts: 21
Registered: 2-9-2008
Member Is Offline
|
|
Difference between MTB and Kiteboard
Hi guys,
I've just bought an EXIT mountain board for £30 off of a guy at work, for mountain board use.. I also have a 3m eolo Radsail and an 8m PL hornet . I
put 2 and 2 together and came to the question - what's the difference between a MTB and a kite board, and how much of a chance is there that the two
are interchangable??"
Tom
|
|
B-Roc
Posting Freak
Posts: 3161
Registered: 9-3-2006
Location: Massachusetts
Member Is Offline
|
|
Assuming by kiteboard you mean a board you kite with on land and not water than there is no real difference between a kiteboard and MTB. However,
boards that come set up for mountainboarding often have brakes which you will need to remove from kite landboarding. If the brakes are already gone,
and the bindings are on it, just launch the kite, slip your feet in the bindings and turn the board down wind a bit and you'll be off.
Depower Quiver: 14m Gin Eskimo, 10m Gin Eskimo III, 6m Gin Yeti, 4.5m Gin Yeti (custom bridle and mixer)
Fixed Bridle Quiver: MAC Bego 400, JOJO ET Instinct 2.5 & 5.5, Lil Devil 1.5, Sting 1.2
Rides: Ground Industries
|
|
TomTeaBags
Junior Member
Posts: 21
Registered: 2-9-2008
Member Is Offline
|
|
ahhh, couldn't see where there could be a great deal of difference...
haven't had much chance to use the thing, apart from gliding downhill on it-due to lack of wind.
what's better for kite ATB'ing - highwind and small kite or low wind and big kite?
|
|
kiteNH
Senior Member
Posts: 708
Registered: 28-10-2007
Location: Seacoast, NH
Member Is Offline
|
|
Quote: | Originally posted by TomTeaBags
what's better for kite ATB'ing - highwind and small kite or low wind and big kite? |
That is kind of a general question so I'm not sure how to answer that. I will say that it is good to be well powered when landboarding. If you don't
have enough power you'll spend a lot of time working the kite trying to get moving and it will be impossible to get upwind.
I find that "the launch" is the hardest part and its much easier to get moving with more power. In order to start moving you'll need to start off
heading slightly downwind. Then when you get rolling you'll want to edge back against the kite. I find that when I don't have enough power when I
start moving the kite has a tendency to luff before I have a chance to edge back and keep tension on the lines.
So go with plenty of kite and plenty of pads.
|
|
Bladerunner
Posting Freak
Posts: 9679
Registered: 17-10-2006
Location: Vancouver
Member Is Offline
|
|
For learning I think low wind and a big kite has a bit of an advantage. As long as you are powered up on the big kite that is. I like having something
to push against to regain balance when I screw up. With a smaller kite and big wind it is a bit harder and more consiquential to recover ?
Powered up and padded is always the better option
Kites: 2.5m Profoil , Quadrifoil XL kitesurfer, NPW 5 Danger.
Flexifoil: 1.7m Sting, 4.9m Blade 3, 9m Blade 2.
Flysurfer : 19m Speed 2 SA, 7m Pulse
Peter Lynn :18m Phantom, 15m Synergy, 10m Synergy, 1200 Farc, 460 Sarc, 130 Tarc, 5m Peel, 4.2m , 6.4, 8.5 C-Quads, 3.5 LS2 single skin.
Rides: Flexi / P.L. Frankin'Buggy , Shaped + straight skiis, sand skis, Coyote blades. Core 95 ATB. RKB R2 ATB .
Ken (K2)
|
|
speleopower
Senior Member
Posts: 802
Registered: 23-3-2007
Location: Cocoa Beach
Member Is Offline
|
|
I have been riding a Flexifoil Kava kiteland board for a couple years now and find it a lot easier than a regular MTB.
On the Flexi board your feet are very slightly offset from the center of the board. This makes it easier to lean back against the pull of the kite.
It's subtle but makes a big difference to me.
Scott
Quadrifoil Competition XXXL x2
Quadrifoil Competition XXL
Quadrifoil Competition XM
Quadrifoil Q2000 5 meter
Quadrifoil Q2000 4 meter
Quadrifoil Qebra 3 meter
Flexifoil Blade IV 4.9 meter
Flexifoil Blade 3 10.5 meter
Flexifoil Kava
7\'3\" Hana Crew custom
6\'6\" Hana Crew custom-on Saipan
F-One 7\'3\"
Cabrina 5\'6\"-for sale
2x homebrew plywood wake/kite boards
|
|