| Pages:
1
2
3 |
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Alright, so I very gently tapped them into place, put the wheel on the axle, tightened up the axle nut, and now with them pressed most of the way in
there's 1/2" gap between the wheel and the nut which gives it room to travel that distance along the axle. I'm guessing this is not the intention?
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
abkayak
Posting Freak
Posts: 2272
Registered: 7-1-2012
Location: a.b. NY
Member Is Offline
Mood: loving life and becoming wise in simplicity
|
|
everything gets snug...nothing loose no gaps
US-31...Cquad set/ 2.5 Bullet/ 2.6 Viper/ 2.9m Reactor/ 2- 3.5m Bullet/ 3.6 Beamer/ 4m Buster/ 4m Toxic/ 4m Ikon dp/ 4.5 Bullet/ 4.9m Blade/ 5.6
Twister/ 6.6m Blade/ 7.5 Apex/ 9m Fuel/ Phantom I 9,12,15,18/ 2 Flexibugs/ PL Big Foot/ landboards
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
The nut ran out of threads. What the heck did I do wrong? :D
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
abkayak
Posting Freak
Posts: 2272
Registered: 7-1-2012
Location: a.b. NY
Member Is Offline
Mood: loving life and becoming wise in simplicity
|
|
noooooo...spacer in the middle of the wheel between the bearings
US-31...Cquad set/ 2.5 Bullet/ 2.6 Viper/ 2.9m Reactor/ 2- 3.5m Bullet/ 3.6 Beamer/ 4m Buster/ 4m Toxic/ 4m Ikon dp/ 4.5 Bullet/ 4.9m Blade/ 5.6
Twister/ 6.6m Blade/ 7.5 Apex/ 9m Fuel/ Phantom I 9,12,15,18/ 2 Flexibugs/ PL Big Foot/ landboards
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Yeah I remembered to do that. Now I'm trying to remove that wheel and the damn nut got cross-threaded on the way OUT and just spins in place -- the
plastic insert inside the nut is sticking out slightly. Never seen that before. Figures, though. 
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
Stop!!!! remove the wheel take out spacers and put them on axle first. Then put bearings back in wheel and re-install on trucks.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
abkayak
Posting Freak
Posts: 2272
Registered: 7-1-2012
Location: a.b. NY
Member Is Offline
Mood: loving life and becoming wise in simplicity
|
|
sorry this isnt going well, and WG is right i do have a board w/ spacer on the inside
US-31...Cquad set/ 2.5 Bullet/ 2.6 Viper/ 2.9m Reactor/ 2- 3.5m Bullet/ 3.6 Beamer/ 4m Buster/ 4m Toxic/ 4m Ikon dp/ 4.5 Bullet/ 4.9m Blade/ 5.6
Twister/ 6.6m Blade/ 7.5 Apex/ 9m Fuel/ Phantom I 9,12,15,18/ 2 Flexibugs/ PL Big Foot/ landboards
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
Were there no other spacers? The alloy ones go between the wheel and trucks. I don't know about Primos but my superstars came with larger black
spacers that go between the bearings.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Would love to. Axle nut spins in place. As do I, at the moment.
Never even got the chance to get out on it and I already destroyed it. Fantastic.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
No, per my picture on the previous page, there were the two colored ones and the smaller metal one. I put the metal one inside the wheel, ostensibly
in between the other two larger ones.
The bigger issue at the moment is how the heck do i get the nut off the axle now?
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
Ok first off . What trucks do you have?
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
abkayak
Posting Freak
Posts: 2272
Registered: 7-1-2012
Location: a.b. NY
Member Is Offline
Mood: loving life and becoming wise in simplicity
|
|
bad...if it spins w/out coming off the only way i know is to cut/grind it off, im ok w/ that for my own stuff not yours
right now got to hope the axle threads are ok and the nuts threads got chewed up
US-31...Cquad set/ 2.5 Bullet/ 2.6 Viper/ 2.9m Reactor/ 2- 3.5m Bullet/ 3.6 Beamer/ 4m Buster/ 4m Toxic/ 4m Ikon dp/ 4.5 Bullet/ 4.9m Blade/ 5.6
Twister/ 6.6m Blade/ 7.5 Apex/ 9m Fuel/ Phantom I 9,12,15,18/ 2 Flexibugs/ PL Big Foot/ landboards
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
SS nut has lost its threads more than likely. And that is preferable to the carbon steel axle being shot. But it is replaceable. And I'm pretty sure
Ted wants your boarding experience to be a good one.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
My guess is it's shot. At this point I'm just trying to salvage the wheels. I'm no stranger to tools, but this was bizarre. I stopped when the nut ran
out of threads, and there's NO WAY I over-tightened it for it to cross threads on the way out.
I'm pissed right now, as there were no instructions with it, none on Trampa's website, I even asked them for it and got no response. This thing was
NOT cheap, either, as you all know. Now I am likely going to have to get new trucks. Not cool.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
get an open end wrench and turn it to come off and pull out on it at the same time.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
I need to know what trucks you have. channel or skate?
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Channel....I think.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Way ahead of you on that wrench idea -- it spins and moves laterally a little, but it's not coming off. The nut is the kind with a nylon insert in it.
Somehow that got twisted out slightly while I was initially attempting to remove it with the socket wrench.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
Quote: Originally posted by Psychotronic  |
I'm pissed right now, as there were no instructions with it, none on Trampa's website, I even asked them for it and got no response. This thing was
NOT cheap, either, as you all know. Now I am likely going to have to get new trucks. Not cool. |
Keep calm, I'm sure Ted will make this right. They don't come with instructions as it's not usually a persons first board. Usually one steps up to a
TRAMPA after they have been boarding a while.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Well, I'm stuck, as is this axle nut.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
The axles come out of channel trucks. There is a set screw not far from where it goes into the truck body. If you loosen it ,you may be able to slide
it out. Not sure if they are press fit or not so it might take some force to pull it out.That will allow you to get the wheel off.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
I just tried to remove mine. It's in there pretty good. No luck, but still trying
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
Mine has been around seawater its whole life ,so mine may be frozen.
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Now I see what I did wrong with the spacer -- per the link above, click on the trucks tab, it shows the spacer on the inside edge of the wheel, not
INSIDE the wheel.
Still can't get the nut off, though, or its axle.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Sent another email to Ted at Trampa, hopefully he'll respond to this one.
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
trickyrickxx
Junior Member
Posts: 21
Registered: 22-7-2014
Member Is Offline
|
|
I am in the UK where Ted is based and it 21.25 here now so I wouldn't expect a email any time soon I am sure he will reply to you as soon as he can
HQ Montana m6 9.5m
Custom Trampa holy pro 15°
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
Nutsplitter or dremel time...
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
WELDNGOD
Posting Freak
Posts: 5143
Registered: 11-10-2006
Member Is Offline
Mood: Dyin' to go flyin'
|
|
http://www.northerntool.com/shop/tools/product_200396173_200...
WELDNGOD on VIMEO
https://vimeo.com/user2580342
NAPKA US187
PKD
Combat 2.4 / 4.2
Century 1.8 / 5.5
Century II 2.2/2.8/3.5/4.5 /10.0
Brooza IV 3.0 prototype
Buster Soulfly 1.5 / 2.2 (KIA)/ 3.3 (lost at sea)
Buster Soulfly PRO 3.3 / 4.4
Buster (gen 1) 5.5
FLEXIFOIL
Sting 1.7 Punk
Rage 2.5 / 3.5/ 4.7
Revolution 1.5 SLE
17 ply Custom TRAMPA w/ verTIGo trucks
2 homebrew buggies,2 homebrew KYTBYKS,1 homebrew tandem trailer
GOPRO 3 WHITE, 3+ BLACK, HERO5 BLACK
CONTOUR HD
LET YOUR SOULFLY!
RIDER for KOKOPELLI KITER
|
|
|
Psychotronic
Junior Member
Posts: 61
Registered: 3-11-2014
Location: Harriman, NY
Member Is Offline
|
|
Nut splitter, eh? Hmmm......
Trampa 35º Long ATB
HQ Rush IV Pro 350
Flysurfer Peak2 6m
|
|
|
| Pages:
1
2
3 |
![[*]](images/perspective/default_icon.gif){kind=icon}
