mgatc
Member
Posts: 444
Registered: 16-10-2008
Location: Florence, SC
Member Is Offline
|
|
Scorp Set up?
Trying to find the correct lengths for a bar set-up to use with a 10m Scorpion. The Peter Lynn set-up page
(myweb.tiscali.co.uk/mx5alan/arcs/ARCsetup_FAQ.htm)has not been updated with the Scorp numbers.
Anyone aware of another source for this information?
Thanx,
m
HQ: Scout 3m, Neo 11m, Neo 8m
PL: Scorpion 10m
Cabrinha: 12m Switchblade, 16m Crossbow
SU-2 Bigfoot, Liquid Force Proof 151, Klein 145
MBS Comp 90 Landboard
Flexifoil Buggy
Mystic Waist/Seat Harness
2 DIY Plyboards
|
|
WolfWolfee
Senior Member
Posts: 695
Registered: 7-1-2007
Location: Smith, Alberta
Member Is Offline
Mood: Blessed with Wind
|
|
I've got a 16M, someone must have a 10 who can help you out.
3M Legend
4.9M Reactor
9.5M Sabre
16M Scorpion
18M Guerilla
Flexi Bug & 661 Armor & Giro Helmet
|
|
flyjump
Posting Freak
Posts: 2070
Registered: 7-4-2009
Member Is Offline
|
|
I can't tell you specifics but my 13 scorpion I set the front lines closer to the bar do there's more depower, I put lots of throw in it. I'll measure
it tomorrow for you
|
|
tridude
Posting Freak
Posts: 4097
Registered: 20-10-2006
Location: South Carolina
Member Is Offline
Mood: Semper in excretum sum sed alta variat................alwayz in the crap but the depth varys.........
|
|
15 in of bar throw..............bar is pulled all the way in, front anr rear line connection points are all lined up...same as any other PL bar set
up......................... :duh::duh:
17m Ozone Zephyr (2012)
15m Flysurfer Silver Arrow 2
12m Ozone Catalyst (2013)
10m Ozone Catalyst (2012)
MTH Colonel Reb customs 160x45 carbon, 141x43 wood
Wainman Joke & Demitri Pro
11'6 Naish Nalu
6' Davo Fish
|
|
mgatc
Member
Posts: 444
Registered: 16-10-2008
Location: Florence, SC
Member Is Offline
|
|
My three PL bars are all set up the same with everything even when the kite is fully powered. I'll just stay with this set up. If the wind will ever
blow again, I'll check it out :bouncy:
Thanks all,
m
HQ: Scout 3m, Neo 11m, Neo 8m
PL: Scorpion 10m
Cabrinha: 12m Switchblade, 16m Crossbow
SU-2 Bigfoot, Liquid Force Proof 151, Klein 145
MBS Comp 90 Landboard
Flexifoil Buggy
Mystic Waist/Seat Harness
2 DIY Plyboards
|
|
flyjump
Posting Freak
Posts: 2070
Registered: 7-4-2009
Member Is Offline
|
|
scorpions are the best for land!
|
|
markite
Posting Freak
Posts: 1769
Registered: 8-3-2004
Location: Cambridge, ON, Canada
Member Is Offline
|
|
Are you using the long throw bar setup from Jim? If you are using a stock PL bar - depends which bar you have - you may want to add short rear
extension.
With the long throw bar set-up you don't need to worry about that. And once you power up the kite you'll have a far greater range of power to depower
in your reach.
Just adjust your depower line so that when you are moving the kite and pull in the bar the kite doesn't stop or back down. It should keep moving
forward. That amount you pull in will vary in length depending on wind conditions.
Hope that helps,
If there anything else more specific I can help you with I still have my 10 Scorp kicking around.
Here was a little vid I shot using my 10 Scorp at NABX 08:
http://www.youtube.com/watch?v=hQthJKTNStE
Had one of those little ATC bullet cams mounted on the control bar and spinning it around with my thumb. A bit awkward trying to fly keeping the bar
level toward the kite. First part is slow heading upwind then a nice little run back down past camp.
Mark
Mark Groshens NAPKA KC 13
WindSpeed kites & design - Canada
Peter Lynn Arcs: Charger2 22.5 +18 + 15 + 6.5, Charger I 6, Scorpion 16 + 10, Phantom II 12 + 9, Orig Phantom 9 + 6, Synergy 10 + 8, F 1200, S 840
Ocean Rodeo: Flite 17 + 12, Rise 13 + 10 + 7, Razor 9 + 6
Foils: PL Leopards and Lynx, Airea Raptors, some PL Reactor IIs + IIIs, Libre Spirits, Cross Kite Sonics, Ozone Flow
Peter Lynn Kite Cat for cruising the lakes
buggies: PL XR+, Cameleon Pagona, custom bigfoot, PL Bigfoot, custom ice buggy
Boards: 2 custom directionals, O.R Surf series 6-3 and 5-11, Mako Duke, Mako Skinny, Mako 140 Wide, Mako 150 Wide, Mako King, Brunotti
lots of old school skis, snowboard
|
|
mgatc
Member
Posts: 444
Registered: 16-10-2008
Location: Florence, SC
Member Is Offline
|
|
Hey Mark,
Nice video. Looks like the 10m was doing alright on the playa!
I got the kite only from Jim (Jellyfish) but the bar is from my 12m Phanny. I think it is a 50cm Zero 4 bar. It has the Zero4 release and safety leash
on the leading edge line. It has a carbon fiber insert in the middle where the depower line goes through.
It is probably a short throw. Compared to my other Zero4 and Zero7 bars, the depower strap seems shorter.
I've only had it out once in VERY light winds. The kite wouldn't stay in the air so I didn't get a chance to figure it all out.
If it is a short throw, what length extentions do you suggest?
mel
HQ: Scout 3m, Neo 11m, Neo 8m
PL: Scorpion 10m
Cabrinha: 12m Switchblade, 16m Crossbow
SU-2 Bigfoot, Liquid Force Proof 151, Klein 145
MBS Comp 90 Landboard
Flexifoil Buggy
Mystic Waist/Seat Harness
2 DIY Plyboards
|
|
markite
Posting Freak
Posts: 1769
Registered: 8-3-2004
Location: Cambridge, ON, Canada
Member Is Offline
|
|
If I recall from my original set-up on an Zero4 bar I had put on my stock extensions that are longer with several knots. I had it on the shortest
setting so it was probably close to 5 inches.
The 10's like a pretty decent wind to start to shine.
In that little vid you actually see me pass Jim going the other way - he comes back and I turn and drag the bar end as I look to find him. He then
catches up at the end of the vid - that's your kite he was flying
Mark Groshens NAPKA KC 13
WindSpeed kites & design - Canada
Peter Lynn Arcs: Charger2 22.5 +18 + 15 + 6.5, Charger I 6, Scorpion 16 + 10, Phantom II 12 + 9, Orig Phantom 9 + 6, Synergy 10 + 8, F 1200, S 840
Ocean Rodeo: Flite 17 + 12, Rise 13 + 10 + 7, Razor 9 + 6
Foils: PL Leopards and Lynx, Airea Raptors, some PL Reactor IIs + IIIs, Libre Spirits, Cross Kite Sonics, Ozone Flow
Peter Lynn Kite Cat for cruising the lakes
buggies: PL XR+, Cameleon Pagona, custom bigfoot, PL Bigfoot, custom ice buggy
Boards: 2 custom directionals, O.R Surf series 6-3 and 5-11, Mako Duke, Mako Skinny, Mako 140 Wide, Mako 150 Wide, Mako King, Brunotti
lots of old school skis, snowboard
|
|
WolfWolfee
Senior Member
Posts: 695
Registered: 7-1-2007
Location: Smith, Alberta
Member Is Offline
Mood: Blessed with Wind
|
|
I know my Scorpion needs air, definitely a pain in the a** in low winds. The old Guerilla will fly in 8 mph winds as long as you get her filled up.
The Scorpions like to be full to fly and then the magic begins...lol
3M Legend
4.9M Reactor
9.5M Sabre
16M Scorpion
18M Guerilla
Flexi Bug & 661 Armor & Giro Helmet
|
|
tridude
Posting Freak
Posts: 4097
Registered: 20-10-2006
Location: South Carolina
Member Is Offline
Mood: Semper in excretum sum sed alta variat................alwayz in the crap but the depth varys.........
|
|
my 16m had extensions with knots at 4 and 8 inches...........I always used the 8 inch knots...................
:duh::duh:
17m Ozone Zephyr (2012)
15m Flysurfer Silver Arrow 2
12m Ozone Catalyst (2013)
10m Ozone Catalyst (2012)
MTH Colonel Reb customs 160x45 carbon, 141x43 wood
Wainman Joke & Demitri Pro
11'6 Naish Nalu
6' Davo Fish
|
|
jellyfish
Junior Member
Posts: 13
Registered: 16-6-2009
Member Is Offline
|
|
Hi Mel
I used it with a rigged long throw bar I won't be home till sunday I can measure the setup I was using kite should work on the stock bar smaller kites
needed very short if any extentions add some leaders to the rear lines and you should be able to dial it in hope the wind gets better.
Jim
|
|
mgatc
Member
Posts: 444
Registered: 16-10-2008
Location: Florence, SC
Member Is Offline
|
|
Thanks all. Just checked the wind for the next 5 days and in a word, the wind S- imply U- nderproduces C- onsistant K-not- S!
The set-up I have may be fine. Just have to wait out the elements (and be off work) to give a real go. I have no doubt that I will be well satisfied.
PL hasn't dissapointed me yet.
Jim, good to hear from you! I'm diggin the dust from the PLaya on the sail. Kinda makes me a poser until I actually get to NABX.
Wolf, I had a 10m Guerilla for the buggy that I LOVED the one time I got to fly it, on a water session no less! One time because I loaned it to the
instructor for his next lesson and the brand new to kiting student pounded it over and over again completely shredding a spar pocket. The instructor
was good for it, but I was out of a kite. Been looking for suitable replacement for about 4 months. When I saw Jim's Scorp posted, I was all over it.
Heck of an upgrade in my view!
Mark, Thanks for pointing out Jim and the Sorp to me. It didn't registar when I watched it the first time.
Mel
HQ: Scout 3m, Neo 11m, Neo 8m
PL: Scorpion 10m
Cabrinha: 12m Switchblade, 16m Crossbow
SU-2 Bigfoot, Liquid Force Proof 151, Klein 145
MBS Comp 90 Landboard
Flexifoil Buggy
Mystic Waist/Seat Harness
2 DIY Plyboards
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
Quote: |
Jim, good to hear from you! I'm diggin the dust from the PLaya on the sail. Kinda makes me a poser until I actually get to NABX. |
Yeah when I was helping Dean unpack his Arcs at JIBE they had dry lake dust all over them. It was nostalgic for me--it's been a long time since I've
been to the high desert for a buggy fest.
The day I had my Scorp 16 out it did seem to want the extensions on the back lines. The bar was very far out when I released it--too far to keep both
hands hooked on it. If I pulled it even the inch I needed to grab the bar the load would rise to the point the buggy would slide. This was with the
bar tuned for full depower . So today I'm headed to Anastasia for a day of flying and I'm taking some new pigtails. I'm also going to move the bar
stopper in a bit so I can reach it without stretching--seems simpler than getting longer arms.
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
mgatc
Member
Posts: 444
Registered: 16-10-2008
Location: Florence, SC
Member Is Offline
|
|
Right on Phillip. Happy 4th! Know you'll enjoy the day at Anastasia.
Since I've started this game I think I've lost a 1/2 inch of skin on my knees and elbows and my arms have stretched a 1/2 inch.
HQ: Scout 3m, Neo 11m, Neo 8m
PL: Scorpion 10m
Cabrinha: 12m Switchblade, 16m Crossbow
SU-2 Bigfoot, Liquid Force Proof 151, Klein 145
MBS Comp 90 Landboard
Flexifoil Buggy
Mystic Waist/Seat Harness
2 DIY Plyboards
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
I couldn't fly the scorpion Saturday--the wind was a steady 5-6 mph. I could launch with an assistant, but the kite would never top off. Eventually
it would tip over and crash on its side in a pathetic heap. After several failed self launches I realized the near wing tip would *never* slide out
as I pulled the far wing tip up. To me this was the big indicator I didn't have enough wind to fly. Did I read that right?
Not to be defeated I pulled out out my ancient 10m Peel and it flew just fine. The beach was getting puny by that time but I had fun.
So how low a wind speed can you fly an Arc in? And which Arc would that be? The Arc wind range calculator shows all of them bottoming out at around
6 MPH. Does that meet others experience? I'm pretty sure the last time I had the Scorp out it was 7 or 8 MPH when I launched and that day rocked.
The Peel was fun, but it is a very old prototype model that has a defect that makes its tail wag under higher load. It makes for a very narrow useful
range. When the tail starts wagging the kite slows down. Hanging on as that beast crosses the power zone at glacial speed is quite a test. So I
really ought to phase it out some day, but with what? What launches and flies in 4-6 MPH and generates enough load to buggy in that wind?
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
BeamerBob
Posting Freak
Posts: 8308
Registered: 11-5-2007
Location: Down on the bayou
Member Is Offline
|
|
There was a thread where this was discussed last week.
Low wind kite thread
There are some big 12+m yakusas that thrive with this wind, and with 5-6 you could really use an 8.3m Peter Lynn Reactor. If your wind goes even
less, the 10.8m Reactor comes into play and you can fly it up to about 7 mph where the 8.3 is feeling sporty. The 18m Phantom would fly and make some
power at about 5-5.5 mph.
Coastal Wind Sports Team Rider
Landsegler Disc wheels
PTW Hero Buggy - XXtreme ApeXX Buggy US 88 - Libre Hardcore
IvanpahBuggyExpo.com
Youtube link
Bob Muse
HQ Montana X 8m, Montana IX 12m, HQ Ignition LEI 5m,
PL Phantom 12m, 15m, Big Blu 24m+, Synergy 10m, Venom 10m, 13m , Phantom II 12m Vapors 3.8, 5.4, Crosskite Sonic 7m, PKD Combat 10.3m
Uturn Butane 2.5m PKD Buster 3m Genetrix Hydra 7m Ozone Yakuza GT 14m
|
|