Just ordered 2 new Fly Surfer Speed 3's. a 15 & 19.

Only flown LEI's so far. Any tips to start. Worried about water relaunch, and also step by step launch and land on ground. Thanks in advance for any help.

Your title and your post don't agree, did you get a 15 and a 10 or a 15 and a 19? I'm guessing the 19...

your kites will come with video on how to everything......big thing is bar position.............letting your bar all the way out on the speeds will allow the kite to run to the edge i.e. incease your upwind ability.....................relaunch is easy, depower the strap about halfway (make sure about this step because you will "hot launch" on restart, pump/pull both steering lines and the kite will rise, let one steering line go, she will turn 180, and climb like a homesick angel.....................

lay the kite out with one tip upwind/into the wind, sand it down well and unfold the downwind half...................unroll your lines down wind and make sure too tug on them...this will eliminate tangles...........once youre ready to launch walk 45 degrees or more off of the upwind tip.....the down wind tip will catch air, and the kite will rise...use the bar (sheet in to stall it for a semi pre-fill.......bar out and up she goes (dont forget to clase your zips prior to launch)...............

to land fly to the edge of the window, turn her over on the leading edge and deploy the FLS or FDS...............if you have a helper have them grab the upwind tip.......once they grab the tip walk towards them and the kite will flag out down wind............


enjoy and let us know how you are getting on with the Speeds