kitesurfer
Member
Posts: 201
Registered: 19-12-2007
Location: jacksonville fla
Member Is Offline
|
|
peter lynn replacement spars
I ordered thes from TAP Plastic online:
1ea sku 02754 od .414 x .337 x 54.5" epoxy tubein $7.35
4ea sku 02766 od .505 x .417 x 54.5" epoxy tubing $8.00
you can use either spar. I use the larger spar and have been using them for a few years now. the smaller i use to make a ferrule and join two pieces
of the larger spar--perfect fit. 2 piece spars that won't corrode! glue one side if you want to hold the ferrule in place. i just use a little
electrical tape.
I always order extras because of the shipping charge--$15.59 for this order.
Charger 12/15, Flysurfer
Speed3, 21, GLIDE, MAKO KING, UNDERGROUND FLX134,
|
|
BeamerBob
Posting Freak
Posts: 8308
Registered: 11-5-2007
Location: Down on the bayou
Member Is Offline
|
|
How durable are they? Are they plenty stiff? What do you put on the ends?
Link
Coastal Wind Sports Team Rider
Landsegler Disc wheels
PTW Hero Buggy - XXtreme ApeXX Buggy US 88 - Libre Hardcore
IvanpahBuggyExpo.com
Youtube link
Bob Muse
HQ Montana X 8m, Montana IX 12m, HQ Ignition LEI 5m,
PL Phantom 12m, 15m, Big Blu 24m+, Synergy 10m, Venom 10m, 13m , Phantom II 12m Vapors 3.8, 5.4, Crosskite Sonic 7m, PKD Combat 10.3m
Uturn Butane 2.5m PKD Buster 3m Genetrix Hydra 7m Ozone Yakuza GT 14m
|
|
kitesurfer
Member
Posts: 201
Registered: 19-12-2007
Location: jacksonville fla
Member Is Offline
|
|
not straight stiff like carbon fiber--they will give a little but not bendy like tent pole. they don't splinter on impact like carbon fiber. they
will break if stepped on. I take a small washer slightly larger in diameter and tape it to the ends to prevent poke through of the pockets. I have
also used just tape (electrical) which works too.
Charger 12/15, Flysurfer
Speed3, 21, GLIDE, MAKO KING, UNDERGROUND FLX134,
|
|
arkay
Posting Freak
Posts: 1793
Registered: 23-10-2008
Location: Oregon
Member Is Offline
|
|
I'm guessing that you could have a decent ammount of flex without hurting performance. No real idea or way to measure it though
I wonder if it breaks sharp, I wouldn't want the edges to cut the fabric, albiet it's heavy duty.
I peronsally hate end caps. I constantly lose them in the spar pocket. I tried glueing them but found that it doesn't work so I just made the ends
of the bungee larger so that there is no chance of it falling in; not that it's a big deal. I believe the bungee is primarily for storage and ease of
removal, and from experience it's not that hard to remove a spar piece. End caps are a pain to get out :flaming:
US503 - Manzanita, Oregon
Fixed Bridal: Flexifoil Sting 1.2, 1.7; Rage Acid 2.5m, 3.5m, 4.7m, 6m | Peter Lynn Vapor 11.2m, 16.1m | NPW 7m
Depower : Peter Lynn Venom 2 13m, 16m, 19m | Peter Lynn Phantom 15m | Flysurfer 2.5 SA 19m
LEI : Flexifoil Atom 7m, 9m, 12m; Mutiny 8m
Land rides : Libre Hardcore; Libre v-max; Peter Lynn XR+W | Rollerblade Coyotes! | Ground Industries AK Pro
Water rides : Slingshot Misfit 134; Ocean Rodeo Mako 150; North WAM! 5\'10
4 Sale/Trade: HQ M1 5m, Flysurfer Pulse 10, PL Venom 2 16m, PL Venom 19m
|
|
BeamerBob
Posting Freak
Posts: 8308
Registered: 11-5-2007
Location: Down on the bayou
Member Is Offline
|
|
First thing I do when I get an arc is tape the end caps on with electrical tape. They never get stranded in the bottom of the pocket that way.
Coastal Wind Sports Team Rider
Landsegler Disc wheels
PTW Hero Buggy - XXtreme ApeXX Buggy US 88 - Libre Hardcore
IvanpahBuggyExpo.com
Youtube link
Bob Muse
HQ Montana X 8m, Montana IX 12m, HQ Ignition LEI 5m,
PL Phantom 12m, 15m, Big Blu 24m+, Synergy 10m, Venom 10m, 13m , Phantom II 12m Vapors 3.8, 5.4, Crosskite Sonic 7m, PKD Combat 10.3m
Uturn Butane 2.5m PKD Buster 3m Genetrix Hydra 7m Ozone Yakuza GT 14m
|
|
Feyd
Posting Freak
Posts: 2956
Registered: 3-1-2009
Location: Norther New England
Member Is Offline
|
|
Arkay I've played around with Chargers and uber flexy spars. Makes for some interesting handling in some ways but if they're too flexy and you drive
it to aggressively you get a collapse.
It's fun to watch. You can totally see it just before it goes.
Chris Krug-Owner @ Hardwater Kiting. Authorized Dealer of Ozone, Flysurfer, HQ kites.
www.hardwaterkiter.com 603-986-2784
|
|
action jackson
Senior Member
Posts: 950
Registered: 7-5-2003
Member Is Offline
Mood: wind-holic
|
|
I've been using two sky-shark carbon tubes just taped together!They work fine but have to be careful launching not to snap the rods! They are
super flexible and light! Diffefently help on lighter wind days!...........aj
Ocean Rodeo Razors 8,10,12
Ocean Rodeo 5\'11 Surf series
PL Arcs 6,15m orange Phantoms 10,19m Venom 16m proto scorp ,synergy 12,
NPW\'s .5,2.8,6.9 and 15m skytex
145x49 crazy fly,Decay 142x42,aboards z- series 135x40
Pl xr+ buggy , Pl Kitecat hull #5
www.kittyhawkkites.com
www.wavesvillage.com
www.thekitexpo.com
\"Holding it down, since 20 knots!\"
|
|
|