elfasa
Senior Member
Posts: 605
Registered: 8-8-2007
Location: Norfolk, UK
Member Is Offline
|
|
Bearing help
I'm trying to get some new bearings for my board, so I can finally put it all back together.
I've got some older hubs that I hope to use, and I have some new (to me) scrub trucks that i'm using.
Once again I'm struggling to find all the measurements I need for the bearings (I had this problem last time i needed some!)
The bearings that came in the hubs have '1614z' on them. I've tried looking online and measuring them with a ruler, and I think they're 28x10x9mm.
That could be wrong though.
The bearings don't fit on the scrub trucks, they're smaller. I assume the trucks are 12mm in that case?
I can't find any bearings that are 28x12x9mm.
Any ideas ? Have I measured them wrong?
I'd like to use the hubs I have to save some cash, but if I can't find any suitable bearings I'd have to get some new hubs too.
Sorry for yet another potentially nooby question!
Thanks
Tim
|
|
|
bigkid
Posting Freak
Posts: 4178
Registered: 12-4-2009
Location: Somewhere over there -->
Member Is Offline
Mood: :-)
|
|
take the wheel and the bearing with you to the place that sells bearings and they will measure it and get you some replacements. keep that new info
for next time.
Appex buggy, Libre hardcore buggies.
Flexboardz. Blokarts.
PKD Century Soulflys. NPW's. Nasa Stars.
A few other less flown oddballs,
Line sets from 10" to 328" or 2m to 100m.
worlds only AQR that works.
North American distributor for PKD.
"Kite Bugging is not an addiction until you try to quit".
|
|
|
elfasa
Senior Member
Posts: 605
Registered: 8-8-2007
Location: Norfolk, UK
Member Is Offline
|
|
Ah, okay fair enough. What kinda shops sell the bearings i'll need ?
Cheers
|
|
|
B-Roc
Posting Freak
Posts: 3161
Registered: 9-3-2006
Location: Massachusetts
Member Is Offline
|
|
Google "bearing shop" or "bearings store". I did that when I needed some and found out there was a distributor about 0.25 miles from where I work.
Who would have thunk. Maybe you will get lucky too. Skate shops may be able to help too.
Depower Quiver: 14m Gin Eskimo, 10m Gin Eskimo III, 6m Gin Yeti, 4.5m Gin Yeti (custom bridle and mixer)
Fixed Bridle Quiver: MAC Bego 400, JOJO ET Instinct 2.5 & 5.5, Lil Devil 1.5, Sting 1.2
Rides: Ground Industries
|
|
|
rtz
Posting Freak
Posts: 1107
Registered: 12-10-2010
Location: Edmond, OK
Member Is Offline
|
|
|
|
|
![[*]](images/perspective/default_icon.gif){kind=icon}
