Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
Ozone Access V6 8m & 10m -- BOTH SOLD
I've decided to thin my quiver and am selling two wonderful kites in near new condition. Each kite has been only flown once or twice on grass or snow
and are in about as perfect a shape as used kites can be in. Many fellow PKF tribesman (and tribeswomen) can attest to the quality of my used
equipment and these beauties won't disappoint.
Both the 8m and 10m Access kites are the V6 models with the venerable re-ride system installed. Re-Ride is an ingenious system for bringing the 5th
line INTO the kite to scrunch it up when deployed. Great for re-launching after pulling the rip cord or for simply bringing the kite undramatically
out the sky at the end of a session.
Each kite comes complete RTF with a custom Ozone backpack that will easily fit two kites, a stuff sack that I added myself, a short leash, and the
instruction manual, repair kit, etc.
These kites have the stainless steel rings installed where the 5th line enters the kite for the Re-Ride setup. The 10m was from the 2016 production
run and had these rings installed up front. The 8m was from the 2015 production run and I retrofitted it with the kit supplied by Ozone.
New these kites cost $1,200 for the 8m and $1,250 for the 10m.
8m Ozone Access V6 2015: $700 + shipping -- SOLD
10m Ozone Access V6 2016: $750 + shipping -- SOLD
[img]
[/img]
[img]
[/img]
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
Memopad
Member
Posts: 182
Registered: 23-2-2016
Location: Michigan
Member Is Offline
It's kind of tempting to buy back my 10m. My first kite *tear :D
Ozone Access v6 (4m,6m,10m) Chrono v2 (9m,13m,18m)
HQ Montana 7 14m
southpadreburt
Member
Posts: 157
Registered: 1-12-2011
Location: South Padre Island
Member Is Offline
Mood: Retired from Work, Working overtime with the Wind
U2U sent
Prism Micron
Rev B Series Standard,Vented,Full Vented
Rev PowerBlast 2-4
Rush 3 Pro
Ozone Access 4, 6, 8,10
Ozone Summit 8, 10
Ozone Frenzy 13m Ultralite
Cabrinha 7, 9, 13 Xbow
Cabrinha 11 Switchblade
2 PL BigFoot Buggies
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
I edited the original thread entry to note that these two kites have the stainless steel rings installed where the 5th line enters the kite for the
Re-Ride system. This was a retrofit issue for Ozone Access V6, Frenzy V10, and Summit V3 models in their 2015 production runs. Thus retrofitted as
these two Access kites are they are now identical to the ones produced with the steel rings in place from the get-go. The 8m was retrofitted and the
10m had them as original equipment.
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
Memopad
Member
Posts: 182
Registered: 23-2-2016
Location: Michigan
Member Is Offline
The 10m was the newest V6 version and had the rings already
Ozone Access v6 (4m,6m,10m) Chrono v2 (9m,13m,18m)
HQ Montana 7 14m
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
Thanks! It was the 8m then that I retrofitted. I don't believe there was an other difference with the 8m.
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
southpadreburt
Member
Posts: 157
Registered: 1-12-2011
Location: South Padre Island
Member Is Offline
Mood: Retired from Work, Working overtime with the Wind
U2U sent
Prism Micron
Rev B Series Standard,Vented,Full Vented
Rev PowerBlast 2-4
Rush 3 Pro
Ozone Access 4, 6, 8,10
Ozone Summit 8, 10
Ozone Frenzy 13m Ultralite
Cabrinha 7, 9, 13 Xbow
Cabrinha 11 Switchblade
2 PL BigFoot Buggies
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
8m SOLD
10m going fast, don't delay!
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
BLACK FRIDAY SPECIAL!!! - 10m: $700 plus FREE SHIPPING anywhere to the Lower 48 States. That's about a $75-80 value!! Deal expires Monday,
11/28. Limit 1. :D
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
abkayak
Posting Freak
Posts: 2272
Registered: 7-1-2012
Location: a.b. NY
Member Is Offline
Mood: loving life and becoming wise in simplicity
I must say your really stressing my marriage on a regular basis
US-31...Cquad set/ 2.5 Bullet/ 2.6 Viper/ 2.9m Reactor/ 2- 3.5m Bullet/ 3.6 Beamer/ 4m Buster/ 4m Toxic/ 4m Ikon dp/ 4.5 Bullet/ 4.9m Blade/ 5.6
Twister/ 6.6m Blade/ 7.5 Apex/ 9m Fuel/ Phantom I 9,12,15,18/ 2 Flexibugs/ PL Big Foot/ landboards
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
Shameless bump to get this BLACK FRIDAY special actually displaying on, well, Black Friday. :evil:
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
CYBER MONDAY BLOWOUT!!!
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
Memopad
Member
Posts: 182
Registered: 23-2-2016
Location: Michigan
Member Is Offline
Well you just had to do this to me didn't you...
I'll buy my kite back from you, jerk :D
U2U sent.
Ozone Access v6 (4m,6m,10m) Chrono v2 (9m,13m,18m)
HQ Montana 7 14m
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
SOLD to the man who's wife just slapped her hand over his mouth! :D
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
Memopad
Member
Posts: 182
Registered: 23-2-2016
Location: Michigan
Member Is Offline
Luckily I'm not married, I do what I want! hah
Ozone Access v6 (4m,6m,10m) Chrono v2 (9m,13m,18m)
HQ Montana 7 14m
skimtwashington
Posting Freak
Posts: 1758
Registered: 22-3-2011
Member Is Offline
Steve always has crazy good deals....Even I bought something in the past!
...Reminds me of Crazy Eddie (NY);
VIDEO