flyguy0101
Posting Freak
Posts: 1338
Registered: 15-3-2009
Location: Staunton, VA
Member Is Offline
Mood: Never to old to play, but failing to play will make you old!
|
|
Wanted 12mm front axle bolt and side spacers for flexifoil buggy
Okay- rust on the bearings one and to protect the hub and fork from damage I had to cut the bolt and side spacers - so in search of the 12mm
flexifoil front axle assembly if anybody has one they want to part with- let me know- fortunately since I had sold this buggy- I was able to send
the buyer the one from my other buggy but that leaves me without- please help
Thanks
Scott
TEAMRIDER for Coastal Wind Sportsand Trampa mtn boards
www.trampaboards.com
My rides- Flexi buggy and Trampa mtn board
My engines-
HQ Scout 2m , 4m
Flexi Rage 3.5 & 4.7
PL Arcs- 10m Venom 1, 13m, 19m Venom II, 15m Charger2
|
|
|
bigkid
Posting Freak
Posts: 4178
Registered: 12-4-2009
Location: Somewhere over there -->
Member Is Offline
Mood: :-)
|
|
1/2 inch is a hair over 12mm by only .028. I have used a piece of all thread from Home Depot. The one by my house sells metric all thread, and nuts.
Or you could try lowes also.
Appex buggy, Libre hardcore buggies.
Flexboardz. Blokarts.
PKD Century Soulflys. NPW's. Nasa Stars.
A few other less flown oddballs,
Line sets from 10" to 328" or 2m to 100m.
worlds only AQR that works.
North American distributor for PKD.
"Kite Bugging is not an addiction until you try to quit".
|
|
|
bigkid
Posting Freak
Posts: 4178
Registered: 12-4-2009
Location: Somewhere over there -->
Member Is Offline
Mood: :-)
|
|
As for the side spacers, electrical conduit works too. Of course you'll end up with a bit of extra for the next time the rust comes to cause havoc.
Appex buggy, Libre hardcore buggies.
Flexboardz. Blokarts.
PKD Century Soulflys. NPW's. Nasa Stars.
A few other less flown oddballs,
Line sets from 10" to 328" or 2m to 100m.
worlds only AQR that works.
North American distributor for PKD.
"Kite Bugging is not an addiction until you try to quit".
|
|
|
TEDWESLEY
Member
Posts: 437
Registered: 4-1-2007
Location: portland maine
Member Is Offline
Mood: cat-like,I stalk the wind, finding little, I nap.
|
|
Try boltdepot for the axle bolt. I used a bicycle handle bar for spacer stock. Check that it rests against the inner
race of the bearing and not the shield.
Reactors 2.8 3.5 6.9
Peaks 4m 6m 12m
HQ Neo2 11m Ozone Chrono V2 15m WASP 5m
Flexi wide axle w/mids and runners
Skis Nordic skates and winter stuff
Quatro Wing Foilboard Slingshot Foils
NAPKA US06
|
|
|
![[*]](images/perspective/default_icon.gif){kind=icon}
